Linux Hint Posted November 10, 2023 Share Posted November 10, 2023 An SSD or a solid state drive is a storage device in a computer that is used to store data. An SSD contains non-volatile flash memory. SSD(Solid State Drive) is mainly famous for its fast speed as it is much faster than a normal HDD drive. Everything in this universe expires after a certain duration. Comparatively, SSD having bad health can lead you to lose data permanently. So, it is always necessary to check/monitor hard disk health. For that purpose, there are multiple methods you can consider. This write-up will elaborate on the various methods to examine the SSD health on Windows 10/11/ How to Check SSD Health in Windows 10 and 11? These are the methods that can be used to check the SSD health: Method 1: Check SSD Health in Windows Using Command Prompt Method 2: Check SSD Health in Windows Using PowerShell Method 3: Check SSD Health in Windows via Defragment and Optimize Drives Method 4: Check SSD Health in Windows via System Settings Method 5: Check SSD Health in Windows Using CrystalDiskInfo (Third Party App) Method 6: Check SSD Health in Windows Using AIDA64 Extreme (Third Party App) Method 7: Check SSD Health in Windows Using SSD Life (Third Party App) Method 8: Check SSD Health in Windows Using Smartmontools (Third Party App) Conclusion Method 1: Check SSD Health in Windows Using Command Prompt SSD health can be inspected in Windows with the help of Command Prompt. To check the health in CMD, read the steps provided below. Step 1: Launch Command Prompt in Standard Mode First, open “Command Prompt” via the Start menu: Step 2: Check SSD Health To check the SSD health, first, execute the “wmic” command to enable the “Windows Management Instrumentation Command line” utility: wmic Then, run this command to examine the SSD health: diskdrive get status It can be observed from the above output that the SSD is in good health. Method 2: Check SSD Health in Windows Using PowerShell Windows tool PowerShell can also examine the SSD health. Read the steps provided below to examine the SSD health using PowerShell. Step 1: Launch PowerShell in Standard Mode First, open “PowerShell” via the Start menu: Step 2: Check SSD Health Type the given command in the PowerShell console to check the SSD health: Get-PhysicalDisk The above screenshot confirms that the SSD is in good health. Method 3: Check SSD Health in Windows via Defragment and Optimize Drives The “Defragment and Optimize Drives” is a Windows application that is used to optimize drives by rearranging the files. It can also check the SSD’s health. Step 1: Launch the “Defragment and Optimize Drives” Application First, move to the Start menu, locate and open the “Defragment and Optimize Drives” application: Step 2: Check SSD Health The “OK” status indicates that the SSD is in good health. If in case, it shows “Needed Action” then it needs to be optimized and hard drive is not in good health: Method 4: Check SSD Health in Windows via System Settings Windows system “Settings” app has the “Storage” settings that can be used to check the SSD health. Instructions to check the SSD health in Settings are given below. Step 1: Open Settings App Initially, open “Settings” app via Start menu: Step 2: Open Storage Settings Click on the highlighted option to open “Storage” settings window: Step 3: Open “Disk & Volumes” Settings Click on the highlighted area to open “Disk & Drives” settings window: It can be observed that the SSD is in good health: Method 5: Check SSD Health in Windows Using CrystalDiskInfo (Third-Party App) The “CrystalDiskInfo” is a third-party application that collects all the SSD metrics and analyzes them. It can be utilized to check the SSD health. Moreover, it provides the complete details about the hard disk or SSD, including, its firmware, capacity, and its temperature. The “CrystalDiskInfo” app can be downloaded from here. After installing the “CrystalDiskInfo” app, launch it to check the SSD health. It can be observed that the SSD health is 100% good, which means it is healthy: Method 6: Check SSD Health in Windows Using AIDA64 Extreme (Third-Party App) The “AIDA64 Extreme” is a third-party application that provides complete details about the system including devices, operating system, network, or server. Most importantly, it is used to examine the health of an SSD. To check the SSD health first download the “AIDA64 Extreme” app. Install and launch it. Then, expand the “Storage” section and click on the “SMART” button to check the SSD health: Method 7: Check SSD Health in Windows Using SSD Life (Third Party App) The “SSD Life” is a third party application that is specially designed to check the SSD battery health. It can be downloaded from here. After installing the SSD Life application, open it to check the SSD health: Method 8: Check SSD Health in Windows Using Smartmontools (Third Party App) The “Smartmontools” is another third-party application that is specially designed to check SSD health. It can be downloaded from here. Step 1: Launch Smartmontools App First, search and open the “smart health status (-H)” application from the Start menu: Step 2: Check SSD Health It can be observed that the SSD health result has been passed, which means that the SSD in good health: Conclusion To check the SSD health in Windows 10/11, first, open “Command Prompt” and then, execute the “wmic” command to enable the CLI tools. Once the CLI tools are enabled, simply execute the “diskdrive get status” command to check the SSD health. Read the above guide to know the further methods to check SSD health. View the full article Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.