Jump to content

CPU Temperature in Ubuntu Linux

Linux Hint

Recommended Posts

The temperature of the CPU/GPU depends upon the applications or programs that run in its system. If your device’s compatibility is not high, then your system may face an overheating issue. This system overheating issue occurs when the system’s temperature exceeds a specific limit.


System overheating creates a performance-related problem while working on the laptop/computer. Hence, CPU temperature monitoring can help you overcome the overheating issue by closing unnecessary system applications. This article covers the complete information on how to check CPU temperature in Ubuntu Linux.

How to Check CPU Temperature in Ubuntu Linux?

You can install sensors in the system to check CPU temperature in Ubuntu Linux. For this, open the command terminal and execute the following command in it:

$ sudo apt-get install lm-sensors

In case the system doesn’t have sensors installed, these sensors will start downloading after the successful execution of the above command.


Now, use the command below to detect the system’s hardware monitoring chips. This command would give the information of sensors of CPU and hardware monitoring chips:

sudo sensors-detect

Finally, execute the below command to check CPU temperature and other details related to it:



You can also execute the watch -n2 sensors command to display the temperature-related details continuously.

Use Psensor to Check CPU Temperature in Ubuntu Linux

It is required to configure lm-sensors before installing Psensor in the system. lm-sensors is a hardware monitoring’s command-line utility, and you can also install hddtemp for measuring hard disk temperature.

Open the Linux terminal and execute the command below for installing lm-sensors and hddtemp:

sudo apt install lm-sensors hddtemp

After executing the above command, use the detection command to detect the hardware sensors:

sudo sensors-detect

Use the Sensors command to make sure that it is working correctly:


Once you execute the sensor command, you will receive a result like this:

Adapter: Virtual device
temp1: +43.0°C (crit = +98.0°C)
Adapter: ISA adapter
Physical id 0: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +40.0°C (high = +100.0°C, crit = +100.0°C)

Now run the following command for installing Psensor in the system:

sudo apt install psensor

After installing Psensor in the system, run this application and configure it according to your requirements.


How to View Hard Disk Temperature?

In Linux, hard disks have a SMART built-in health-check tool that offers various options, such as self-monitoring, analysis, reporting technology, etc. SMART also shows the details regarding the disk’s failure so that you can stay protected from losing the data. This tool also helps you check the disk for any potential issues.


How to Check Temperature in Ubuntu Linux by i7z?

This command line is used to print CPU information on Intel core processors like i3, i5, and i7. It is also used for reporting CPU temperature.

Execute the following command for installing on Ubuntu:

sudo apt install i7z


How to Check Temperature of NVMe SSD in Ubuntu Linux?

For monitoring the temperature of Nvme ssd, execute the following command in the terminal:

sudo apt install nvme-cli.

After the successful installation, use the nvme command to obtain the list of NVMe devices:

sudo nvme list.


In this article, we have collected complete details on how to check CPU temperature in Ubuntu Linux by multiple procedures. As we have explained, system overheating can cause various issues in the performance of your system, so it is essential to monitor the system’s temperature. You can easily use these procedures without any errors because all of these procedures are tried and tested on different systems, and hence are safe to execute.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...